Itb's

[hughesy666]

I've taken off my stock inlet manifold and all that put on my adapter and itb's but it seems like I'm missing a sandwich plate or something like . There is so much room on the bolts and the fuel rail won't go in properly. I can't upload photos.
Many help would be good

[sundee]

What adapter?
What throttles?
What engine?
Upload pics to and copy the IMG tag into your post.

[hughesy666]

T3 adapter, silterop quads , 16v bigport . . Fuel rail hitting itb's . It's like there needs to be a spacer or something inbetween the block and adaptor

[sundee]

ITB need to be mounted upside down.
Throttle cable link goes underneath

[luke20]

Pretty sure I seen your post on Facebook Dylan. All you gotta do is take those 2 studs out of the head and either replace them with shorter studs or just use bolts. Im sure you have already figured that out by now haha.

[Sam-Q]

you shouldn't take them out, it's just that T3 have sold another unfinished product. Drill the holes into the adapter larger to fit over locating collars.

[sundee]

Sam, you should keep your hate to yourself mate.
Have u seen pictures of this guys issue?
If you haven't you can't make statements like that.
Keep it to yourself!

[sundee]

If you have a product issue Dylan, pm me and I can help you out.

[Sam-Q]

I have used this product and it didn't have provision for the locating dowels. Therefore it's unfinished product.

Also no where on the product page does it say that the throttles are mounted upside down nor that there are fitment issues in a front wheel drive. What do you think about this?

Also why should I keep this to myself, I don't understand it.

[Sam-Q]

Thinking about it you're right, I made an assumption. Then to correct myself going off your original statement how about this correction- if the manifold won't completely go up to the head because the locating collars hold it off it's because T3 didn't bother to make provision for it or to let it be known. How about that