4age 4wire CAS pinout/triggers

[ghostintheshell95']

Hi all. Having some trouble getting my triggers to work with an Adaptronic e420c, incorrect wiring of the CAS is to blame.

Have found -G (common ground) by testing resistance between the 4pins, just need to know whats what with the other three wires. Distributor is on a smallport 16v but unsure if it's original or adapted from a 4agze/other 4wire dissied 4age. I have a red, yellow, green & white coming from the sensors in the Distributor.
White being common ground, I need to know which colours are NE, g1 & g2.

If anyone can check theirs and let me know that would be sweet.

Cheers

[ghostintheshell95']

this guy circled in green. my plugs actually grey but yeah the 4pin plug off the dissy.

[ghostintheshell95']

Ok so I traced the wires back from the plug to the sensors inside the dissy, red is NE, green G2 & yellow G1.

Mods can delete this if you like or leave it for someone that needs reference. Cheers