RWD sandwhich plate...

[dk-dk]

Ok i have a fwd 4age going into an ae71, have the extractors manifold cooling etc sorted, now just down to the fiddly bits.
-The motor is out of ae92, has 212mm clutch/flywheel,, i have the spigot bearing for the motor, i have searched but no solid answer, can i use the fwd clutch/flywheel? is there any difference? also which starter do i use?
-Do i need a sandwhich plate? kind of in the dark about this one..
-Also, any info on doing the throttle cable, or any other relevant info that usually gets skipped over in conversion guides is much appreciated as im trying to get it done as smoothly and hassle free as possible..(dream on haha)
any help much appreciated guys, cheers,

[phoenix]

Fwd clutch and flywheel are exactly the same except the spigot bearing
You can use a 4ac starter but best to use a 4age one due to the heat of the exhaust going over it
Yes you need a sandwich plate, use the one on your 4ac engine since that is the correct rwd one
There are lots of throttle cables you can use just go to a wrecker with your old one and find one slightly longer
KE70 and AE82 both work but are a little on the long side, I believe the corona cables are a better fit

[dk-dk]

cheers mate helpful reply, i assume fwd/rwd 4age starters are the same?

[phoenix]

Yes the starters are the same