Results 1 to 3 of 3

Thread: Water/Methanol Injection

  1. #1
    Senior Member Mad RS's Avatar
    Join Date
    Dec 2008
    Name
    Chris
    State
    Queensland
    Location
    Wynnum
    Country
    Australia
    Posts
    171

    Default Water/Methanol Injection

    Hey Peeps,
    Has anyone one here had a play with water/methanol injection?? I have been reading up on different kits and installations and it seems like a very good idea with only a few draw backs. Has anyone tried it??

    Cheers
    Run what ya brung...............and make damn sure ya brung enough!!!!

  2. #2
    Oldschool Member FORDISGAY's Avatar
    Join Date
    Oct 2006
    Name
    nick
    State
    Qld
    Location
    Deception Bay
    Country
    Australia
    Posts
    26

    Default

    Yup water injection is awesome. More effective than e85 in my personal opinion. I tuning my car one night (rb30det skyline) and it had some pretty decent 440cc injectors in it. I had a 50/50 mix of e85 and 98 and to get my car running mint afrs i had maxed out my injector duty cycle at about 10psi boost at high rpm.

    I then used up all of the fuel and got some 98 i was trimming back all the fuel tables and found that i could run the same boost and same power running at 70% injector duty cycle.

    Now at this point if i had installed the water injector kit (which i didn't because i didn't have the correct nozzle sizes) I would have been able to run one whole point leaner afrs without having to worry about detonating (From 12.8 to 13.8) and i could have thrown much more timing advance without detonation. All this plus the benefit of having cooler cylinder temps and a constantly steam blasted carbon free combustion chamber.

    All these benefits with nothing much really to lose.

    I hear a lot from people with excuses about why they didn't install water injection. Oh im not using this as a drag car. Oh e85 is god to me. I have a big intercooler im good mate. All just uneducated comments that prove most of these guys are painfully ignorant , or simply just couldn't be bothered to learn about how it works.

    You get people who can't justify spending 200-400 bux on something that none of their mates are smart enough to use on their cars. Instead they will go spend 1000 bux on a e85 fuel system with swirl pot and shiny lines big expensive untunable injectors. It doesn't make much sense to me.

  3. #3
    Senior Member
    Join Date
    Jan 2009
    Name
    Eddie
    State
    NSW
    Location
    Sydney
    Country
    Australia
    Posts
    483

    Default

    Winner.

    But in seriousness, a properly setup water/meth injection can be a very good thing. It is quite complex to set one up properly with failsafes in case you clog a nozzle or run out of water. To be honest, the cost of setting it up for e85 vs water inj is very similar.
    4agte finally finished. 252rwkw with more to come

Similar Threads

  1. Direct Port Injection Explained
    By Matt in forum Info / Pics & Discussion
    Replies: 0
    Last Post: 20th August 2012, 02:48 PM
  2. out board injection
    By Celica RA45 in forum Technical - Questions
    Replies: 6
    Last Post: 3rd December 2010, 04:25 PM
  3. Liquid Propane Gas Injection
    By sundee in forum Technical - Questions
    Replies: 22
    Last Post: 8th February 2010, 03:33 PM
  4. water injection with quad throttle bodies
    By dr1ft-pig in forum Technical - Questions
    Replies: 18
    Last Post: 21st February 2008, 11:52 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •