Lots of good info in this thread here
Hello which clutch and pressure plate can I take, when I use a w58 gearbox behind a 7agte?
Cheers Martin
Lots of good info in this thread here
Ae86 Drivingclub - Toyota AE86 Car Club where AE86 | KE70 | Toyota 86 / GT86 | Subaru BRZ | Scion FRS owners
A friend told me that, the clutch from my 4agte will fit the 7a engine. I need only the flywheel from the 7a.
Here is a light weight 6 bolt flywheel, only 200mm though:
You need a friction disk to suit the W-box and the pressure plate to suit the flywheel.
The original 7afe flywheel is 212mm which is easier to work with and will give you a higher torque rating. Once you decide which diameter clutch you are after then contact me and I can give you the info. I suggest email because I often miss notifications of a PM.
If you have any other questions other than part numbers then feel free to ask here.
My website: SQ Engineering - 4AGE and 3SGE upgrade/replacement parts
- SQ Engineering on facebook -
Please e-mail to contact me instead of sending a private message on here.
I run a toda 212mm flywheel with an exedy hd pressure plate to suit an ae92 and a Cushioned button clutch disc to suit a RN40 hilux. All bolt on with no mods.
This in on my 7agte->w55.
Nice One