for a 16 valve track use engine..

crank/block girdle plate (16 or 20V type)
TODA or similar steel oil pump gears (9.5mm thick version)
up-rated pressure release valve spring
cams around 300 degree duration & 9.5 mm lift
oversized alternator and water pump pulleys
lightweight/oversized crank pulley
con-rods, 20mm gudgeon pin, 42mm big end bearing size (as per 20V rods)

will consider new or used

i know where to get all these new , but just seeing if anyone has any such bits lurking before i start sending money overseas.

thanks