Reply With Quotepull out dash surrounds, pull out cluster itsself unplug wires and spedo cable
put ke dash in and plug it up
should all be the same plugs
Ae71 cluster into Ke70
hey fella's just got an ae71 cluster with revs for my ke to replace the big fuel and temp gauge and i was wondering whats involved in putting it into a ke wiring wise?
any links you guys know of for wiring diagrams?
anyone done this that can shed some light?
cheers
Last edited by KePanelVan; 19th July 2009 at 05:39 PM.
pull out dash surrounds, pull out cluster itsself unplug wires and spedo cable
put ke dash in and plug it up
should all be the same plugs
Originally Posted by Nicko
Eddy's got the idea, it's a no-modification affair.
The you might have some trouble removing the dash surround, they're a bit interesting to get in and out. Be careful or you'll crack it.
Other than that it's plug and play. Remember to plug your speedo cable back in.
You can have any brew you want... as long as it's a Datsun / Corolla / What is that?
I have found that the easiest way to remove the surround is to remove the wheel and drop the steering column.
Yeah i normally just take the steering column surround off, this gives you enough room, just.
You can have any brew you want... as long as it's a Datsun / Corolla / What is that?
thanks for the quick reply fellas
nah thats no biggie i've pulled the thing out a few times coz the old cluster had a shorting problem and kept blowing fuses for the petrol gauge...
but i've plugged the new one in and the speed works being mechanical, the fuel works and isnt popping the fuse any more which is good but the issues im having are...
- temp doesnt work
- handbrake light stays on
- dash lights dont come on
- indicators both flash at the same time on cluster only
- revs dont work
- no high beem low beem light
so yeah thats the problems so far, i've plugged everything in but was wondering if i needed to fiddle with the wiring to get everything going???
update - found out that the ke70 cluster that has the big clock is a straight swap but mine is the one with the big fuel/temp gauge and has a small analoge clock on the top left side. Im assuming now that wires will need to be swapped in the plugs to get it all running right?
=(
Last edited by KePanelVan; 19th July 2009 at 05:42 PM.
they bolt in, with no mods. so if its not working either the dash cluster you got is dead, or something has gone wrong (i.e short in the board or interferrence).
i have a good condtition working taco cluster if yours is dead. otherwise just have a look over to see if anything looks suss.
-dan
gunner:
ALL DRIFT MODIFICATIONSYou're a fucking idiot, and I am ashamed that you are part of this community. Sure there isn't many tracks, but praticing on the street isn't the alternative.
Grow the fuck up you little JDM whore
for all your drift modification needs
all good! i figured out that panel van are a bit diff and you have to swap some of the wires around to other plugs! im just going to copy my mates sedan so i should be right.
If not ill shoot you a pm!
cheers for all the help fella's
ahh its going into a pannel van, yes they have differnt placings of wires, hey when you work it out do you mind pming me with what you swapped around as i have a taco dash for mine and it didn't work
cheers
lol yeah man its a lil trickie if your not good with that sort of thing which i ain't but try this link
its all about swapping a ae71 cluster into a panel van and there is a write up link about half way down the first or second page!
Posting Permissions