Faceplants 86 build

[Vance]

is the video using both camry squirters or one camry and one ae86 squirter?

if theyre both camry ones you might have to grab the squirter motor out of the camry because you have low flow going to the 2nd (passenger) squirter.

awesome idea though. ive always HATED the ae86 squirters. think i may do the same myself.

do you know what model camry you got them from?

[Faceplant456]

in the vid the passenger side has the AE86 squirter and the camry on the drivers side.

heres a pic of the type of camry i got my squirter's from. they are on alot of newer toyota's as well but i found that wreckers have a few of this type and they are easy to get . i got my ones for free but that only cuz i get lots and lots of parts from the wreckers i got them from ... but they shouldn't be more than $20 from the wreckers or get new ones if you really like but i don't know what price toyota would charge ... anyway they are just squirter's who cares if they are used.

[Vance]

awesome. im gonna grab some for sure

[Faceplant456]

yea use a file and make a template out of paper or card board to get the shape you need to file out into the bonnet otherwise you could make a mess of it ... and a little tip when drilling the major hole for them drill it with the 11mm straight up and drill it in reverse it just keeps catching in forward and it dosen't take long even in reverse.

[corknose]

jjust completly fucks the drill, you can resharpen it with less angle

[Faceplant456]

they were my bros drill bits ... so mehhh.
anyway if we were to change the angle on it it would need to be changed back to normal afterwards and i really couldn't have been fucked doing that... it worked my way and they look good.

[corknose]

Another idea is put wood under it

[Faceplant456]

yea a brace under it would work to but you would need someone else to hold the wood while you drill unless you are awesome at multi skilling.

[Faceplant456]

got a new dizzy rotor today cost me $7.40 delivered to my work
and then i also got a speco temp gauge for free. it come 2nd hand out of a HQ race car ive been working on apparently it wasn't working but with a quick test here at home i found there to be nothing wrong with it so good for me now just gotta find a spot to put it.

[Faceplant456]

about to go pick up my new battery relocation kit from skit along with a rear tower brace, i have also currently got in the mail a JDM washer bottle and a whiteline center piece to move my number plate lights upto the body of the car and not on the rear bar.
and finally my dash cluster ive been waiting on is on its way. which should be fucking Sweet! thats all for now im off to go see Skit!