ok heres the list.
1. finish ecu wires small plug 12 pin & circuit opening relay.
2. finish engine bay wires (2nd fuse box for 4A-GE)
3. finish engine bay plumbing. radiator- heater etc...
4. get new dizzy rotor.
5. mount all engine bay components . igniter,coil etc...
6. fill engine with oil , fill gearbox with oil , check and fill diff with oil.
7. make new brake line from master cylinder to splitter
8. fill and bleed brake system with brake fluid
9. attempt to start and hope for the best.
10. get rego once running. (blue slip & rego)