PDA

View Full Version : surge tank in a ke70



trikzlane
12th December 2009, 04:37 PM
doing my 4age convo and im running a surge tank. can anyone correct me if im wrong about the lines and where they go?

mereki.

Dylan
12th December 2009, 04:57 PM
http://www.ae86drivingclub.com.au/forums/showthread.php?t=12834

ke70dave
12th December 2009, 05:03 PM
i think that tank is designed to mount up the other way?

either way, in general you should do it from this.

going from the LOWEST pipe to the HIGHEST:

- feed to high pressure pump (fuel rail)
- feed from low pressure pump(life pump, from tank)
- return from fuel rail
- return TO tank (over flow to tank)

you can prolly swap the middle 2 pipes around, but you need to have the overflow to the fuel tank at the highest point, and the feed to the high pressure pump (fuel rail) at the lowest point.

heres a tech article i did on my surge tank setup

some pics in there of it setup

http://www.ae86drivingclub.com.au/forums/showthread.php?t=8255&highlight=surge

trikzlane
12th December 2009, 05:26 PM
ok then ill do that but the overflow to tank, do i use the carbon canistor line on the fuel tank and rid the canistor cause theres;
.fuel to motor
.return from motor
.carbon canistor

mereki.

1sik20valve
12th December 2009, 09:16 PM
this should help
http://www.rollaclub.com/board/index.php?showtopic=36029