PDA

View Full Version : water pump removal



leo_palmer
7th May 2010, 11:16 PM
Car - ke70

motor - 4K

use -daily

problem -water leaking for the water pump

occurs/started when - driving to work cars running hot and can hold water

personal situatio: none need my car back


so guys i tried searching but nothing came up, now having just switched to toyotas from nissans looking for some advice on the easiest way to remove the water pump from the 4K with the least hassles any help would be greatly appreciated

86TRD
8th May 2010, 02:24 AM
*remove radiator/shroud if in the way
*any belts that may need to be taken off
*fan if it has one?
*remove water pump
*clean up the rear housing ( guessing your replacing the front )
*some form of gasket glue
*new gasket
*new waterpump on
*put everything else back on , leave for a day to let everything set?
*start car with no leaking water WIN.

Ive never actually replaced one on a 4k but have done so on my cressida and it's a piece of piss.
not really an easy/hard way to remove, only comes off one way.

ke70dave
9th May 2010, 01:16 PM
yer 4k is possibly the easiest water pump to remove, since you dont have a timing belt in the way, and the timing chain is internal.

pretty much do what 86trd, take off stuff that look like its in the way, then put it all back.

also get a razor blade and clean up the block where the water pump mounts to it, its more important if you are only using a gasket (no goo) but its good to have everything clean anyway.