t50 gear box bolts

[ae71ness]

Car - ke70

motor - 4age w/ adm t50

problem - lack of gear box bolts

personal situation - need to know specs so i can order gearbox and starter motor bolts.

if youve got some lying around ill buy them or if youve got some handy some measurements would be tops.

[Sam-Q]

Without going outside I can tell you they are an M12 with a 1.25mm pitch, I think the starter is an M10

[Eddy]

go to toyota ask for parts specs, order bolts. i got all of mine for my sr for 37 bucks

[stahlz_ae86]

If you have a wrecker near you I'd be inclined to check if they've got an auto 71 as you should be able to use the majority of those bolts. I'm just in the process of converting my 71 from auto to manual and most of the bolts look like they'll be ok to use. I'll give you all the measurements later in the week (when I work on the car next) if you're still stuck then.

[haveaparty]

ae 82 gearbox bolts is wat i got, go to ur local wreckers

[Anthony]

should have asked, could have thrown some in with your order. :S

[RobertoX]

just go to a wrecker an pull a whole bunch of bolts out of some 80's toyotas and find the right length.

Measure your bellhousing flange and figure out the lengths that you need for each bolt. (shank length should be shorter than the flange thickness :) )

[DearmanKE]

i used 4k bolts on mine, just goto wreckers

[15LIDE]

if u want to no the exact measurements they have them in the 4age manual im pretty sure, or just google it?