Offtopic Thread 2011

[Gunner]

went out drinking for the first time since new years last night, I remember why i dont drink anymore

hangovers suck.

[ke_70]

^+1

pretty sure pecker made that page ;)

[lolwat]

I went out spirited driving no hang over :) smashed my fingrr and its killing

[ke_70]

wish i had somthing to do some spirited driving in :(

[Jdm-Mcc]

I did some spirited driving last night aswell, my tyres copped the hangover haha

Definately not entering DECA day dave, looks like motorkhana not street drift circuit! fuck that haha gunna come watch tho

[Gunner]

I went out spirited driving no hang over :) smashed my fingrr and its killing

hot wheels don't count.

[Pidgey]

Yes they do.
I Hung out with my ex ex ex last night, home alone. Same girl i lost my V plates to.

[Vance]

did she lose her a v plates last night?



its 30 degrees outside which means its skids with aircon time.

[Pidgey]

She lost hers to me like 3.5 years ago in my friends bed :) Ahh what i would give to be young again.

[jay70]

johl if you're in here, did you ever have any troubles with those struts i bought off you? just sold them to casey and apparently all the threads in the hubs and rotors are screwed because the bolts were loose? not blaming just checking

[johl]

Never had a problem with them. Ran them for almost 2 years then thy just sat in my shell so I could move it around. What thread exactly?

[ke_70]

had the sads on cause i thought i had to put bumpstops in the rolla. took the wheels off and there they are, when the fuck did this happen!?

i'm suprised this ke70 hasn't rusted up yet! it's been out in the weather for almost 2.5 years and it's still virtually rust free :)
paints well and truly fucked now.... painted interior still looks mint after 1 year in the sun.

all looks good though, just a few new globes and a clean and it should go through :D

[jay70]

Never had a problem with them. Ran them for almost 2 years then thy just sat in my shell so I could move it around. What thread exactly?
the bolts that hold the hubs to the rotor were apparently loose for a while and must have chewed the thread in the hubs. no worries though i probably should have checked them earlier instead of sitting them in the shed for half a year

[ke_70]

just retap the a size bigger. drill out the rotors if need be. (only if they're hub sentric which i think they are?)

[willa]

Officially will be on 13's all round, mk2 rears and starsharks for steerers :)
Thinking about getting federals for the fronts as tyre choice is limited and I dont want semi's. Rears will.depend on power I guess

[jay70]

yeah that seems like the best idea, dunno though see what the new owner wants to do

[johl]

Sorry to hear man but it is easy to re tap a thread so hopefully he gets it together soon. Didn't he check it before he installed them or did he notice it before be put them on? As I never actually drove on them since taking the hubs off, I would have only wheeled the shell onto and off a trailer so maybe moved 20metres in 2 years?

[lolwat]

hot wheels don't count.

my whore ke does though, different car with coilovers =D

hows the 86 goin?

[Gunner]

haven't touched the 86 for ages, looking pretty rusty to be honest.

willa have a look at the pirelli p zero semi's, its what i use on the front of the vl, and they keep that boat in line, even when its raining.

[Pidgey]

Officially will be on 13's all round, mk2 rears and starsharks for steerers :)
Thinking about getting federals for the fronts as tyre choice is limited and I dont want semi's. Rears will.depend on power I guess
FUCK YES WILL!
Work was awesome, pumped the drums loud and got into a good mood.
Was making smoothies when I spotted a skinny tattooed brunette girl in a dark green dress smiling at me. I just looked at her and mouthed daaayummm without even thinking. She saw it and got a little embarrassed and smiled bigger. When I got to serve her we just stood there checking each other out. I gave her a smoothie and she sat pretty close to where I was working, about a metre away. After I finished serving I quickly scribbled my number and name on a peice of number and did the whole "you dropped this while I was serving you" thing. She read it and blushed and smiled back at me. Weeeeeeeee! She'd better call I'm so stoked about it.

[McLEVIN]

Thinking of putting the 86 on 13x8.5/9 rear and 8 front with 185/60 how will this effect handling grip?

[sam2306]

It wont handle as good as what it would with the correct size tyres, still should
Go alright though.

In other news spool is in skids to happen

[Vance]

so ive been doing the boxing for 3 weeks. my hands have hardened up enough so i can wail on the bag without gloves (its filled with 100kg's of sand, like hitting a brick wall). i bought some kickboxing blocking pads for my legs today. ut them on and gave the bag a go. every kick was like getting hit with a police baton as hard as the pig can swing at your shin. maybe in 3 weeks my legs will harden up. i had bruised knuckles for 2 weeks. looks like bruised shins and feet for atleast as long

[ke_70]

good work ryry.

boxings gay. do muay thai then progress to mma.

[ae86]

muay thai is really fun but also really brutal, did it for 9 months back when i was in VCE
when knuckles harden its all calluses build which is a good thing so nervs dont get too you with feel as much, either way cardio is cardio unless your deciding to use it as a weapon then its a whole different story


got my cusco cambertops today! yewwwwwwwwwwwwwwwwwwwwwww now to figure out, why does japanese inscructions not tell me what these two spacer looking things are for >.>

[ae86]

Thinking of putting the 86 on 13x8.5/9 rear and 8 front with 185/60 how will this effect handling grip?

i got the same setup but in 14s and it handles fine.

[willa]

muay thai is really fun but also really brutal, did it for 9 months back when i was in VCE
when knuckles harden its all calluses build which is a good thing so nervs dont get too you with feel as much, either way cardio is cardio unless your deciding to use it as a weapon then its a whole different story


got my cusco cambertops today! yewwwwwwwwwwwwwwwwwwwwwww now to figure out, why does japanese inscructions not tell me what these two spacer looking things are for >.>

They got in between the bottom of the camber top and the top of you spring hat ;)

[ae86]

oh really cheers lol, its weird ay they actually show you every tool you need to use but didnt show that one part or where it goes, il have to check it out tomorrow, fingers crossed it doesnt piss down rain during the day in vic!

[ke_70]

new cambertops? where and how much?
want some for the ke70/ae86

now to find my old ke70 thread haha!

[johl]

When you put them together it will look like there is almost no thread holding it on but if you don't use them the plates will foul and you won't get much adjustability

[ae86]

really ? did you run them and trust running it with barely any thread grabbing ?

clay i got them from ajps, id advise to hold out till currency gets better though before purchasing,

[willa]

really ? did you run them and trust running it with barely any thread grabbing ?

clay i got them from ajps, id advise to hold out till currency gets better though before purchasing,

Na it just looks like that dude, like when you look down from the top you will see heaps of threads left in the nut

[ae86]

ahk yep, now i need to identify my old ones and sell them next i guess to get some money for the skid pan if i make it in time

anyone remember the 4agze+t 86 ? i love watching the lines this thing left

http://youtu.be/JbFLzk3fYkc

[Vance]

im trained in aiki jujitsu. mu thai is good. mma is just gay. brazilian jujitsu is just as gay. both are sports just like boxing.

ive done aiki jujitsu from a child. as a teenager i thought i should learn how to punch harder with more technique so i did boxing. i did boxing with the local boxing trainer at the gym. did it for 2 years. i also thought i should learn how to kick better with more technique and did taekwondo. i did taekwondo with the womens australasian champion at the time. did it for 6 years. i realised i should have just stuck with aiki jujitsu because i learnt nothing new from boxing or taekwondo. went back to aiki jujitsu for 2 years and then stopped fighting/training.

i only do boxing now for cardio because its a fast and easy way to lean up.





just put 1 of my wheels together. if i knew it would so much of a bitch to put them back together i would never have taken them apart. would have just gotten them polished in 1 piece and sprayed the centres after taping up the lips.

i worked out an easier way to put them back together. the other wheels should only take me 20mins each instead of the hour the first one did. should have taken a pic but i guess ill take pics when im done with all 4

[ae86]

yeah its annoying putting 3pc wheels together, especially if you get ssr meshies that are old and fkn nuts break on you!!! my first set of wheels sucked i restored the crap out of them and the guy i sell them to turns them into dirt was so angry

easier way to get lean is by cheating your body with diets, like me cause i ceebs with cardio

[Vance]

yeah i had 1 bolt snap on me. made me think i should buy new bolts. a shame they cost $3.50 for 4 and i need fucking 20 each wheel. $70 for bolts isnt happening. im just gonna be careful and take a bolt for the snapped one from work.


im thinking of selling the wheels. they look pimp but i dont want the upkeep of cleaning and polishing them to keep them that way


i wanna break down the fat buildup around my heart too so i have more stamina for obvious reasons.

[blinded]

Anyone playing BF3 on PC? I play occasionally and need some friends to play with haha! Boring as hell playing as a pub rand.

[Vance]

i used to play bf3 until mw3 came out. mw3 is faster paced but youll get pissed off more. i find bf3 boring

[ae86]

i ended up getting stainless bolts from bunnings, dont remember it costing me much, or maybe dad bought them for me it was a long time ago ay

haven't tried bf3 but my mate who hates mw3 says bf3 is good, not sure if i trust his taste, he loves cod and rapes it but just hasnt liked mw since the 2nd one

[Vance]

mw3 every class has cheap ways to kill that can be exploited.

assault rifles = tubes
submachine guns = rapid fire
light machine guns = rapid fire
sniper rifles = quick scope
shotguns = range proficiency - worst of the lot

im usually top 3 on server if not top 1 and i dont do any of them because they piss me off so much it would be unethical and hypocritical for me to use them.



im really looking at buying 8 konig rewinds in 14x7 -9 just so i can smash them against gutters and not care. if i sold these wheels i have id be able to buy 8. also looking at when my rust is fixed spraying my car 2pak white with no tints so if i ever smash a pannel i can just respray a panel and not have to get the paint matched. the car is and always will be a thrasher, not a show car.


in other news i bought some ae92 lights today to pull apart and put the silver bits into some spare ae86 lights i have. i remember reading a tech article on doing this once and saw it gives much better light. stock levin lights give shit light.

[ae86]

i dno man if i were going to go cheap wheels id prob go superheavies 15x8 -4 even though i hate 15s id prob like them more over any other shit type of wheel

[ke_70]

just rock the meshies ffs rio!

if you slap them just buy another, its hardly the end of the world. meshies are a dime a dozen.
whens the last time you slapped a gutter anyway?

[rthy]

bf3 is so fuking gay, so many spawn campers, they cant get kills the normal way
i would get mw3 if it wasnt the same shit with extra crap.

yea go 15's, only because of the tyre options, make stock brakes look tiny tho

[johl]

i used to own a set of konig b-bombs and they are heaps cheap now thanks to the u.s $$$. pretty good wheels i think they were 7.1kg 15x7.5 zero offset. you get them through techno toy tuning

[ae86]

johl,

please delete link in your sig i keep staring and looking back at my bank acc...

[Vance]

ive never slapped a gutter. will rock meshies. just being emo as usual. still gonna buy some 14x7 rewinds for skidders

[ke_70]

good boy

[johl]

buyyy

[johl]

meeee

[johl]

daaavvvvvveeeeeee

[Vance]

^ i lol'd

[Vance]

this arvo when i was working on my wheels my neighbours were having a semi-formal party with what looked like friends + relos. kinda looked like an engagement party. when what looked like the grandfather arrived the dad/owner of the house comes outside to meet him. first thing the grandfather asked him was, "who owns the sprinter?"

[ae86]

well they are more important than marriage..

[Vance]

a sprinter wont leave you, but a bitch will. a sprinter always lets you go for a ride, but a bitch wont.

[McLEVIN]

I was working on my sprinter once and some tradies were working on my neighbours house across the road..one of the the apprentices came over and talked to me about it, told me he just bought a ke70

[McLEVIN]

Both take all your money

[Vance]

but with a sprinter you get returns in tyres, upgraded parts, happier times etc. a woman takes your money, you get nothing, and she waits for the next time she can do the same

[ke_70]

what about chest upgrades?

[Vance]

money well spent until she leaves

[Gunner]

so i was meant to be going halves with my boss for these 2 jza80s, which in the beginning was cool, then one was supposedly bent so I figured we weren't going to buy them. Had holidays this past week, so i wasn't in the shop, then at 1130 last night, my boss calls me, wanting toknow if ill be ready to drive to tentiwilliga at 1:30am (16hr return trip) or some shit to tow them back down here, I hadn't spoken to the #### for a week, and yet i am supposed to know his plans for these cars.

Suck my fat dick.


Then when I tell the #### that he should go get one, and i'll pay for a carrier to ppick the other one up during the week, thats not good enough and he has a sook. Some people are just fucking stupid.

[corknose]

Get it and have it straightened

[Gunner]

the bent bit isnt an issue, but driving a heap of shit, vl with a car trailer, locked diff, and a fucked engine (down to 120psi comp on 3 cylinders), for 16 hrs with 2 hrs notice for a bent supra isnt going to happen.

[ke_70]

just get them trucked? easy!

[Gunner]

well thats what i want to do, its going to cost the same either way. Fuel, food, drinks for 2 cars, only have one trailer, so trailer hire for the second. so lets say 300 each car minimum, plus the trailer for a day so thats near on $700 i reckon i could get both cars down here for around 800

[willa]

And you not to mention cost of yours and his time. Truck would be the go!

Ill have a look at those tyres now gunns

[Gunner]

yeah the truck is the way to go, but i work for a fuckwit.

the tyres are pretty good, i get them used from a race team, so i dunno how much they cost.

[willa]

No dice they dont come in 13's. how is work anyway gunner? you reckon you'll stick around?

[Gunner]

i only get them in 18s, so i dont know about what other sizes are available.

as for work, only time will tell.

[corknose]

why do people take the valve out when they stretch tyres?

stop vaccum from heat of the flame cooling and retracting there for popping it offf the bead? taking it out means air preasure wont seat high enough and not seat properly?

[ke_70]

i take the valve out, but i crack open the airvalve just before i light it up so as soon as it pops on the air pressure keeps the beads on.

mind you i didn't last time because i really don't need too. as im only going 185/55 on 9'', easy street!

[OniKyan]

So, umm, four E30's. I think I have a problem.

[ke_70]

ma61's for sale :( really really wanna keep it. i like it more than my 86 somtimes :P

would be awesome stripped dumpped and 1jz'ered with 15x10s

[OniKyan]

I think you should do it. That would kick the shit out of an AE86.

[lolwat]

what a good rack end replacement for ke with more track?

[corknose]

ra65 40mm longer..

[Pidgey]

Such a big night, ended up in Brisbane and passed out on a friends driveway at 3am.

[ae86]

i miss breaking bad
http://www.ae86drivingclub.com.au/dcimages/521593.jpg

[McLEVIN]

What is it about? Drug cooks? Whats so good about it, never really got the appeal

[ae86]

it looks average i know but few workmates got me into it, prob best tv series i watched in years

its about a chemistry teacher who finds out hes got cancer and doesn't make much money from his job
so he decides to cook meth after seeing an ex student leaving a meth house at a crime scene and more or less thinks if idiots can make simple street stuff he could make it 10x better

[OniKyan]

it looks average i know but few workmates got me into it, prob best tv series i watched in years

its about a chemistry teacher who finds out hes got cancer and doesn't make much money from his job
so he decides to cook meth after seeing an ex student leaving a meth house at a crime scene and more or less thinks if idiots can make simple street stuff he could make it 10x better

Best TV show ever.

[ke_70]

haha just had to bail my bro out of the copshop jail lol!

poor #### got maced doing a runner lol!

[benzo]

Best TV show ever.

seconded

[corknose]

your brother sounds like a fucking toss bag,

[OniKyan]

haha just had to bail my bro out of the copshop jail lol!

poor #### got maced doing a runner lol!

What did he do to initiate said "runner".

[ae86]

a lot of good feedback from it, for me it wasnt something i got into straight away type of tv series i had to sit down and concentrate and watch 3 eps in a row to get into it,


worked on the 86 for most of the day was very productive, still feels funny since i haven't driven a car without PS in ages new cambertops and caster rods are in
aswell as all the bushes besides D shackles need to find some that fit! keen for saturday to come so i can hit the skidpan

[ke_70]

assult didn't get anymore more haha

[Jdm-Mcc]

Wooooooooooooooooooooooooooooooooooooooooooooooooo ooorrrrrrrrrrrrrrrrrrrrrrrrrk

Liking the sig claydude

[rthy]

lolz

http://images.brisbanetimes.com.au/2011/11/20/2785052/gal-port-590107702-600x400.jpg

http://www.brisbanetimes.com.au/photogallery/national/gold-coast-schoolies-week-20111120-1noxo.html

[Vance]

love that skirt. i wish i could be 18 again.




bought some ps arms and a jdm bell today. gonna be working on my car a fair bit this weekend. drank too much tonight for a sunday. might call in sick tomorrow

[ae86]

man up dan, you drink you pay for it

[Vance]

yeah my stuff is already packed for tomorrow. no point having the day off anyway, not like i have the parts to work on my car

[lolwat]

Lol i call in sick my boss come and picks me up from my house :/

[spiderman]

4.667 rear end is now go. Whee!!!

...

Too bad the fucker doesn't run lol

[ke_70]

couple bites on the ma.

i think gunner should buy the ma61 and put the 2jz he's about to acuire in it!

[Vance]

I think rhys should stick to vl's :p

[stx-16]

fuck, whilst installing my minispool i got a bit rough and broke one of my shim's..anyone have an idea of where to get one on a saturday?

how the eff did you do that

[stx-16]

FUCK YES WILL!
Work was awesome, pumped the drums loud and got into a good mood.
Was making smoothies when I spotted a skinny tattooed brunette girl in a dark green dress smiling at me. I just looked at her and mouthed daaayummm without even thinking. She saw it and got a little embarrassed and smiled bigger. When I got to serve her we just stood there checking each other out. I gave her a smoothie and she sat pretty close to where I was working, about a metre away. After I finished serving I quickly scribbled my number and name on a peice of number and did the whole "you dropped this while I was serving you" thing. She read it and blushed and smiled back at me. Weeeeeeeee! She'd better call I'm so stoked about it.

i kinda wish i was stil single and worked at a cafe just to do this again lol

[lolwat]

ra65 40mm longer..

thank you

[willa]

Why'd you go jdm bell rio?

[ke_70]

cause he likes to make out he drives it hard enough to boil the clutch

[stx-16]

i really dont see how one can boil the clutch fluid

[ke_70]

depends what exhaust your running.

they're cheap enough to get one anyway.

[Jdm-Mcc]

FUUUUUUUUUUUUUUUU today is my day off and my mrs wouldnt let me sleep last night so im fucking exhausted!

[Nicko]

FUUUUUUUUUUUUUUUU today is my day off and my mrs wouldnt let me sleep last night so im fucking exhausted!

Wouldn't let you sleep

explain?

lol

[Jacobxxx]

It was probably the other way around, Jake kept her up all night crying, talking about his feelings and how he's going to miss the girls at school when he goes to uni.

[Jdm-Mcc]

She was freaking out about shit and I just wanted to sleep and didnt care

[Jacobxxx]

Tell me more tell me more

[Jdm-Mcc]

did she put up a fight

[Jacobxxx]

Tell me more tell me more

[Jdm-Mcc]

was it love at first sight?

[Jacobxxx]

Uh-huh-uh-huh-uh-huh-uh-huh

[Jdm-Mcc]

ae86lyricsclub.com.au

[Jacobxxx]

I had to google how the uh huh uh ahh wahh bit went. hahaha Going to find my Grease dvd tonight

[Jdm-Mcc]

Your life is a musical Jacob Peck.

[Vance]

with the strong possibility of going low mount turbo I thought I'm better off. and while I'm doing my rear main I thought id do/upgrade other stuff while I'm at it. also putting a new speedo drive in, lightweight flywheel, new clutch. when I go to do something I may aswell do other stuff while I'm at it. save me pulling stuff out again

[Jacobxxx]

Can't say im the biggest fan of lightweight flywheels tbh

[stx-16]

there is nothing wrong with them i ran one for over a year

[Jacobxxx]

One in micra is annoying haha

[stx-16]

yeah there realy is no need for one in that lol

[Jacobxxx]

Really annoying to teach rachel to drive in it. She drove the soarer easily, HD clutch and all haha

[stx-16]

yeah they are not for daily driving at all

[Jacobxxx]

Lucky the micra is a racecar and im a racedriver.

[stx-16]

oi pecky should have seen Clinton on Saturday night in the valley
he had a sack of goonie down his pants the whole night pouring it into a glass on the dance floor and shit going around taking drinks out of peoples hands squirting goon on people and poring in into people pockets on the dance floor and just being a funny kent it was sooo funny walking to the train station he had the sack half out his fly at like 4am shaking it as some cops haha they grabbed him and pushed him against the wall and put him in a wrist lock it was sooooo funny he almost missed the train Aaron had to stand in the door way to the train for ages to stop the train so he could get on
and we went to thriller and i saw smitho and his gang of tuff guys
god they play some shit music at that place

and Clinton had two huge voms on the way to marvs house on the train station plat form and one even bigger one up the road from marvs house rite in the middle of the road was sooooo fucking funny "guys wait im coming im going to come" then vomed

[Jacobxxx]

Fairfull didn't believe me that Clinton could party in the Valley on $50, proof he can hahaha.

[stx-16]

he was sooo loose
and he vomed all over a couch/bed thing in the met and like 3 woo girls ran up to it and jumped on it trying to do sext poses then realised it had vomit everywhere then freaked out bad
it was sweeeeet

[ae86]

What a madkent!!

[KurtHS]

Need to go out in Melbourne before or after Matsuri! Rio should come down for it I wanna see him in action.

[Jdm-Mcc]

Haha clinton, what a man

[Jacobxxx]

The man, the legend.

[Jdm-Mcc]

The stanza has been passed down from legend, to legend.

[Jacobxxx]

But you own it..

[Seventy]

hah that night sounds more exciting than all 3 nights at schoolies this weekend, drank all the nights and felt fine the day after, so pretty stoked on that

[Jdm-Mcc]

Yeah I broke the chain didnt I!

I neeeeeeeeed to do more dwifting!

[Jacobxxx]

I wanna do more driifftttiiinnngggg, so keen to sit in this Bride for hours. Looks so cool with purple ra60 passenger seat.

20c pieces make excellent washers

[Jdm-Mcc]

Tis irregal to deface a coin me lad'

Brb calling local mechanic to tear new arsehole about not ordering part I asked for a month and a half ago

[Jdm-Mcc]

Fucking dildo baggins hadnt even ordered them after he told me he did and that they were just waiting on stock to be produced

[Jacobxxx]

Fight him














for his right












to parrrttaayyyy

[Pidgey]

I wish I was at schoolies and 17 again Soooo bad. Fml.

[Jdm-Mcc]

ahh schoolies.

[Pidgey]

Doesn't help that my ex is there. FUCK.
I think ill get laid more than I did at schoolies this week anyway. Wee for being a slut!

[Jdm-Mcc]

I hope your dick shrivels up and falls off casual carlson you cute fuck.

[ae86]

With luck foxtel will actually close up for Christmas eve, Christmas and new years day! Thinking of going nsw or qld on new years to get loose

[Jacobxxx]

Schoolies is shit. Fuck off

[Jdm-Mcc]

Schoolies is a sex party. Fuck everyone

Yeah thats why ryan wants to go so bad!

[Jacobxxx]

LOL

[Pidgey]

LOL.
Jacob is short track saturday or Sunday? I'll come if its Sunday

[stx-16]

I just did a big poop now i want sex
IM I OK?

[Jacobxxx]

You're probably into dudes.

Nah Saturday Ry ry

[stx-16]

oi pecky want to give me a lift to goldcoast on your way there?

[Jacobxxx]

No room broham. Rear will be full of tyre and Rachel will be in passenger.

[Jdm-Mcc]

No room broham. Rachael will be in the boot and tyres will be in the rear and passenger.

How it should be hahaha

[Jacobxxx]

Hahahahaha

[Jdm-Mcc]

Thats how you put a bitch in their place.

"get in tha fuckin boot love" * backhand*

[KurtHS]

Fuuuuuck wanna move to qld baaad!

You still gonna go skidpan Jake?

[Jdm-Mcc]

Yeah dudie ill be there with daveo, should come along the cruise up will be fun ill do some shopping ;)

I want to move to QLD too :(

[Jacobxxx]

Everyone move to QLD

so many superfunhappy skids

[Jdm-Mcc]

Superfunhappysharehouse

[KurtHS]

I'd be entering if I had a running car! I'll try my best to get one going.

Yeah dawg qld is what's up, definitely gonna move up there for at least a year.

[Jdm-Mcc]

Im not entering, Im just spectating. Drive up with us!

[ke_70]

may have found me a nice slant front converton.

have to buy the whole car though :( anyone want an auto spec ke70 borgie centre/axels?

[Jacobxxx]

Jake wants auto centre.

Slant conversion is stupid, everyone knows flat is the superior style

[Jdm-Mcc]

How much for the crown wheel and pinion claydude?

[Jacobxxx]

Free or he's a bad dude.

[ke_70]

im sooooooooooooooo over flat front.

slant so major win if done right. jays silver ae71 for example, thats the exact look im going for.

how much are centres worth? wanted about 100 all up for the diff to make it worth it.

[rthy]

the aero dynamics of the flat front is alot better than flat, but BUTT UGLY

[Jdm-Mcc]

65 posted sounds pretty good

[ke_70]

this is pretty much exactally what im building my 70 into.
simple and clean. this is really the only ke70 that appeals to me atm. (apart from full track cars)

http://www.ae86drivingclub.com.au/dcimages/2/2/1/70744.jpg
http://www.ae86drivingclub.com.au/dcimages/1/9/31609.jpg
http://www.ae86drivingclub.com.au/dcimages/1/9/31606.jpg

http://www.ae86drivingclub.com.au/dcimages/1/9/31607.jpg

[ke_70]

exept with 14x8 starsharks and mabey an 86 ducktail

or g5's if i ever find another set

[ke_70]

65 posted sounds pretty good

see how we go, i haven't seen it yet so might not even get it.

i may even use it in the 86 for a spare at matsuri or somthing

[corknose]

that was a tracck car wasnt it?

[ke_70]

yeah thats streetable though, if built properly.

im talking about c garage kind of track cars. couldn't drive them on the road no matter how much money you have for engineering...

[ke_70]

and theroryetically (sp lol!) all jays cars were street cars.

heck my car was his daily for 6 months!

[corknose]

c's garage cars are defianlty streetable..

[Vance]

Need to go out in Melbourne before or after Matsuri! Rio should come down for it I wanna see him in action.

trying to get shit done so i can come. wanna see me in action sliding or hitting on chicks?


my biggest issue right now is waiting on parts..........

[lolwat]

any car is streetable if you know the right people

[benzo]

AE71 was too sick in the beginning. When it first went 3S-GE and looked normal

I've seen nothing link corkscrew like that car

[KurtHS]

Both Rio both, Benalla (the only close town to Winton) is a struggle for chicks though, country town dirt bush pigs.

What parts do you need?

[corknose]

v12 mira?

[rthy]

yea waiting sucks

[johl]

paid for new engine today. can. not. wait.

[Vance]

parts are paid for, just waiting on getting them posted to me. still waiting on clutch and fly from a supplier, and all my suspension stuff from ajps. ive got til next year so ive defs got time. ill probably have the car painted in a month or 2 aswell as have it mechanically setup as i want.

im moving out again when my parents get back from overseas. theyve gone for 3 weeks and left today. organising a place to stay in the city but also trying to get a garage wangan midnight style to work on my car during the arvo/night so it cant be the average mass security car lot. has to be a concrete wall 1.5 car or long 1 car garage. moving will slow my car down a fair bit so im trying to get everything done mechanically while theyre away.

rust im paying someone to do and paint i will do over 2-3 saturdays back at home (ill just travel back).


just put another one of my wheels together and started by putting 4 bolts each into the other 2. its 8:20 so banging a hammer in my lounge room isnt going to impress the neighbours. they already hate me :P



what engine you getting johl?

[johl]

CA18DET bored and stroked to 2L using Tomei Stroker kit (pistons, crankshaft, tomei piston rings)
and a whole lot of other work done to it. running a trust T517Z turbo. full boost by 3800 and making around 250rwhp. should be alot of fun in my car compared to a heavier silvia it was in

[Vance]

much cheaper than a sr20 turbo would have cost you?

[rthy]

wats the wright difference between the castiron ca18 and allalloy sr20?

[stx-16]

heaps
they are pretty much the same size really

[johl]

roughly the same as a decent sr. but without the rockerarm problems. comes with adaptronic, wiring, fuel bits and bobs. basically everything needed. was supposed to make engine mounts this week but the guy doing it is going to the u.s for 6 weeks so hopefully in the new year i'l drop it in and get it running. as long as someone buys my 4a so i have some cash to throw at the new engine

[KurtHS]

CA's are perfect for any E chassis car.

[corknose]

ca's are good for boat anchors.

[stx-16]

http://www.ebay.com.au/itm/NISSAN-SKYLINE-ENGINE-ALARM-r31-r32-r33-r34-r35-gtr-gts-/140643346848?pt=AU_Car_Parts_Accessories&hash=item20beff29a0

anyone know of anyone else who makes anything like this

[OniKyan]

CA18DET bored and stroked to 2L using Tomei Stroker kit (pistons, crankshaft, tomei piston rings)
and a whole lot of other work done to it. running a trust T517Z turbo. full boost by 3800 and making around 250rwhp. should be alot of fun in my car compared to a heavier silvia it was in

Sounds better than any SR.

[Jdm-Mcc]

CA's are the most underrated motor. If you like rb's you like ca's end of story!

[lolwat]

i like RB's , but i would never go near a CA, not being a dick, but all that work to a CA to make that power, SR unopened could make it


IN SAY THAT, if you can trash and have fun with it, who gives a fuck

[stx-16]

eff that im getting this one
http://www.ebay.com.au/itm/NISSAN-SKYLINE-ENGINE-ALARM-R31-R32-R33-R34-R35-GTR-GTS-/180667061207?pt=AU_Car_Parts_Accessories&hash=item2a109893d7

[ae86]

i dont know, after owning an sr powered car i started to love them more, even the stupid way they sound, dont mind them with cams and straight pipe though then sounds pretty animalistic, only car i drove with a CA was a stock DET 180sx and that was pretty average im sure one worked would give a bit of fun, got a mate who has a 202rwkw ca det in his 86

mind you it hasnt moved since 09 the shitter.

[stx-16]

http://www.ebay.com.au/itm/D1GP-drift-game-PS2-PS3-RARE-/120810352700?pt=AU_PC_Video_Games_Games&hash=item1c20dbb03c

thats cool

[johl]

It also pops flames so that must count for something right?

[Vance]

why get these fancy temp sensors with alarms for? i watch all my gauges when driving to make sure i dont fuck anything.

[ae86]

that d1gp game on ps2 is koots, there was another one that was fkn good! makes me wish my stupid ps3 would backtrack ps2 games id get them two and GTA SA

[ke_70]

alarm on oil pressure is always a good thing. every second counts when theres no oil!

should of just spent that money on a 4age stroker johl...

[johl]

IMO its not worth stroking a 4a. Too much for too little. If I wanted a larger Toyota motor I would be doing what you are but I don't have the skills or know how so I went the easier route that will hopefully get me on track and sliding this thing faster

[Vance]

alarm on oil pressure yes, alarm on temp not so much. my fc had an alarm on oil level but not pressure. i had my pressure gauge right in front of my face so i watched the gauge drop to 0 once. scared the shit out of me but i could pull over and stop the car straight away

[Gunner]

rx7 alarms suck, all of them. and im going to hear tem for the next two days while i work on this heap of an fd.

i really need suspension in the vl, its such an unpredictable car while it boats around on its stock suspension, i'm going to wreck it soon, but i really dont want to spend money on it.

[ke_70]

commodores will be commodoring

get rid of it and rock the 32 if you still have it.

[ke_70]

is it just me? i don't see the apperal of the f20c over a beams.

[Vance]

only rx7 alarm that bothers me is the stock rev limit alarm before rev limiter kicks in. especially sucks when youve raised the rev limit from 7000rpm to 8000rpm. that 1000rpm of annoying buzz makes you want to commit bloody murder

[Gunner]

yeah i need to get the 4m fixed, whichmeans a new head, or repairing the monstrous crack in the head, new laws require more fucking around to get it registered, to get it registered with the 2j (i have the conversion, im just a lazy ####) i need engineers, which now in nsw requires an epa check prior to receiving an engneers cert. mx32 although i love it, will be a #### to get on the road.

[Gunner]

f20c suck clay, piddly little engine, with a decent head on it, abuse it and it will destroy itself, and they have bugger all torque. 3s done right, will always be a nicer engine to drive.

[Gunner]

that said, there will be a locally produced f20c-ae86 kit available some time next year

[ke_70]

3sge >2k
f20c <5k

only good honda swap i've seen is beau's k24 or what ever it is.

[stx-16]

yeah i have a really bright light hooked up to my oil pressure
and i want that for my water just because i dont have a working water temp gauge and this is heaps easy to wire up and most of all its cheap

do you think the whole sensor bolted to the block thing would work ok?
or would i be better off tucking that sensor under a rad hose so then its in the water?

[McLEVIN]

what do you guys think of this http://www.importmonster.com.au/view.php?url=http://page.auctions.yahoo.co.jp/jp/auction/149070572
good buy? looking to buy engines atm but this isn't very discriptive.

[willa]

You could try emailing import monster or jesse streeter and ask for a better english translation, if they want your business that shouldn't be an issue (if you email streeter send him the actual yahoo link)

[ke_70]

just put a water temp guage in if you don't have one.
what's wrong with the standed water temp?

[Jacobxxx]

Doesn't have pretty numbers and wank factor.

[ke_70]

standed dash>aftermarket guages.

[stx-16]

standed dash>aftermarket guages.

if mine worked yes but it doesnt so fu

[Jacobxxx]

how hot are stack gauges

[stx-16]

they make me wet

[corknose]

I drove the corolla for 9months on 10psi oil pressure on limiter and 0 normal driving.

[ke_70]

how much of that was it knocking?

[stx-16]

guns

[Jacobxxx]

For

[stx-16]

kids

[Jacobxxx]

Noooo

for show knives for a pro

[stx-16]

worst

[OniKyan]

Noooo

for show knives for a pro

I'm not sure what's more worrying. The job, or your past.

[Jacobxxx]

WAT

[Jdm-Mcc]

WAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAT

Work will only do 3 days this week :( shouldnt have been so keen to leave on time today, if i stayed back and did overtime I would have made up for a day that I cant work

[Jdm-Mcc]

On the upside just got paid quite nicely

[McLEVIN]

emailed streeter.

http://page.auctions.yahoo.co.jp/jp/auction/149070572 (http://page.auctions.yahoo.co.jp/jp/auction/149070572)


How many K’s old? 2000 kms.
Is it a bigport/smallport/4agze etc? <- from late model ae86, head
is from a ae92 late model. Is that enough info.

Any port and polishing of the head or any head work at all? <- no mention of this.

Upgraded internals, valves, valve springs, pistons etc? <- no mention but doesnt sound like it.
The throttle bodies on it? <- AE101 OEM throttles with funnels.
Is the loom intact? <- comes with loom, but its modified but modded to suit ae86 so he reckons its an easy swap. (comes with ECU)
Is it in good working condition? <- reckons it will drive as is but if you are worried he recommends retuning the ECU.
And does the seller have a buy it now price he’d be willing to sell it for? <- no buy now offered, standard is to make an offer and the seller will either accept or reject it.

assuming 150k win price.


If shipped by JDMGarage`s Container (Brisbane) *closest container to you.
Rough TOTAL in AUD: $3,283
For details please see below break down of costs.
Cost of item ¥150,000
Ship item to the yard ¥4,000
Bank fee to pay seller ¥630
My commission + handeling costs ¥18,000 *this is more than my usual %
as we have to include storage/packing at the yard.
Aus GST + duties ¥30,000
Shipping to Brisbane $500
Rough TOTAL in AUD: $3,283
*depending on exchange rate. current rate is 76.1
.
*NOTE: I get ~3.3 yen lower rate than the posted rate on the day when I access my Australian account through the International ATM.
* DO NOT MAKE PAYMENT YET!!!!!!!!!!!!!!! THIS IS JUST A ROUGH ESTIMATE, PLEASE DONT MAKE PAYMENT UNTIL IVE SENT YOU A PROPER INVOICE!!


any thoughts.

[benzo]

so it's a stock motor with AE101 ITB's, stock ECU and AE86 loom for $3.2k

FLAG

[Jdm-Mcc]

hey its that white guy with the fro! hows the s14 coming along buddy?

[McLEVIN]

so it's a stock motor with AE101 ITB's, stock ECU and AE86 loom for $3.2k

FLAG

Has trd or toda Cams 288 and 302, something like that.
Toda adjustable Cams

[Vance]

if anything it only needs higher compression pistons for the bottom which would set you back $1000. $4.2k for a race motor aint bad.

[McLEVIN]

Thanks benzo put it in perspective really all in all its stock.
I think ill look into johls more :)

[ae86]

so sick of this guy in SA who hasnt sent my bride seat yet, wont refund me either i want to get his address and take annual leave just to pay him a visit

[rthy]

yea thats why im not to keen on interstate dealings, but havent had any issues with the guys when dealing needs to be done lol

[willa]

Tune booked in for monday! not the ideal place but it's a start! Weeeeee sfhs

[KurtHS]

Where at Willdawg?

[benzo]

hey its that white guy with the fro! hows the s14 coming along buddy?

NTB. Driveable in two weeks. then to the shop


if anything it only needs higher compression pistons for the bottom which would set you back $1000. $4.2k for a race motor aint bad.

you don't pay $3k+ for a 4AGE from Japan to do a full rebuild though? Assumed stock head too.

Andy's old proven 105rwkw motor (on sedate tune) was sold for ~$2.5k... with trans, clutch etc exhaust


so sick of this guy in SA who hasnt sent my bride seat yet, wont refund me either i want to get his address and take annual leave just to pay him a visit

I've been meaning to look into this :)

[sam2306]

Dave i just sent a pm to a well known ns member, ill let you know what i get back

[Vance]

yeah thats true. not necessarily a full rebuild but not everyone here is a mechanic or has the know how to pull an engine apart to just put new pistons and rings in.

but looking at the engine the bare minimum that has gone into the head and intake is $1500 in parts. add a decent running low km's smallport to put those parts in is $1000, and then add a computer $800, and then tune the computer $800. it works out about the same as building the engine yourself. i also wouldnt bother getting one from japan just to do that though. locally it can be done

[benzo]

i also wouldnt bother getting one from japan just to do that though. locally it can be done

this

I wouldn't pull the motor down to only do pistons and rings

[ke_70]

3k's still alot to pay for a motor, let alone somone who you havn't/can't even discuss it with.

you'll get away with importing just standed motors, but not built ones.

build one your self to exactally what you want.

[McLEVIN]

Thanks guys,

Ive got a bigport its not worth spending the money on it.

[OniKyan]

Thanks guys,

Ive got a bigport its not worth spending the money on it.

Better off throwing the money at that.

[Vance]

depends if its 3 rib or 7 rib bigport.



it would only take about 2 hours to pull down the motor, put new pistons and rings in and slap it back together. time and money is the factor here. i would have to agree and say personally i would be doing new bearings, seals, gaskets, rod bolts, head studs, if i was going to be putting $1000 pistons in it just because majority of the motor is unknown in what parts, quality and age.

that said im pedantic and a perfectionist, and the tradies at work, the trainers at work, and my tafe teachers all say, "you love spending money dont you? always replacing parts that dont need replacing."

i always come back and say, "yes but itll save me having to do it again."

then they say, "so youd rather spend hundereds of dollars if not more to save yourself 2 hours or at worst a whole afternoon?"

and i say, "you have a point."

[Gunner]

if you dont want to spend money on a big port, find a small port head, soend some money on it, and slap it on

[ke_70]

how rare are 7 rib blocks?

i also read the the FA use the gze block cause they have i high magnisium count or somthing. anyone heard of this?

[Vance]

7 rib blocks are probably more common than 3 rib. only 4ac and 86kw bigport 4age use 3 rib. everything else is 7 rib. 100kw smallport 4age (late smallport) has the rarest block cause it has an extra oil drain from the head to the block, still a 7 rib.

never heard anything about gze blocks having a high magnesium count but it wouldnt be all gze's. theres aw11 (7 rib bogport), then ae92 (early smallport) , then ae101 (late smallport) in order from oldest to newest respectively.