GZE cylinder block spec (standard diameters)

[omy]

Any one have a manaul they can check for me, all i could find is the na specs

[samuel]

100KW bottom ends are IDENTICAL to GZE bottom ends http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif

[Hen is a total nutcase]

81mm bore

The confirmation of this turned up as the first hit when I googled "4agze bore"

Hen

[mattysshop]

http://www.ae86drivingclub.com.au/forums/emoticons/smile.gif problem solved.. all 4AGE's 20v 16v GZE have the same bore/stroke.. the 7A shares the same bore also.. (head gaskets are interchangeable)

[omy]

I know the bore, what I need to know is the fine details like, 81.01 - 81.03 so I can work out what rings and pistons I will need and to see how much the block has changed from stock (wear)

[samuel]

In that case, when you get the bore machined & honed, you ask them what oversize they took it out to and then order rings to suit

[mattysshop]

you might need to mic up your bores then to get the figure yourself.. (using a micrometer)

but if they didn't over bore it, and just gave it a hone.. you should be right with stock size rings..