HELP!!!!!!!!!!!!!! 4age 16v distributor leeds , i dont know which ones i need

[shammy]

hey all I am running a ae82 bigport engine with what I believe to be smallport 100kw map (not afm) electronics, and I have no idea of what leeds to order as it took me so long to track down the dizzy, its one the same as the picture

[shammy]

28632

[rthy]

looks like a smallport dizzy

iv used those generic bosch leads with out valley cover, they are around $3-5 each depending on length.
(looks similar to this, just zip tie them someplace)
http://img33.imageshack.us/img33/7569/picture005oh.jpg
oem replacement kits cost a lot more

[shammy]

yer I hear that will give the generic ones a crack, I mean all it has to do is transport spark , seems the dizzy and ignighter do the rest. ive seen smallport ones running a really small leed like 5.0mm but the leads were way to small for this dizzy. worse case do you think ae82 ones might fit???

[rthy]

take the dizzy cap down to supercheap and do a test fit.

[dove grey 64]

Don't big port ones have 2 wires and smallport 4 wires? Send jimmy1990 a pm, he can sort you out with well priced leads

[Futo_gt86]

Wow, thats my old engine bay form 6 years ago!

[rthy]

Don't big port ones have 2 wires and smallport 4 wires? Send jimmy1990 a pm, he can sort you out with well priced leads
have used those generic leads on big port and small port.

but if u want the oem style leads better off going the oem style leads, I paid $80 for top gun back in 2008 LOL

[shammy]

yer I will get generic until I figure out exactly what the ome leads I need are + at least I will finally be able to start my car, only just done the conversion haven't herd her per yet

[timbo]

I had some topgun leads made to suit a ae85 4age, just need a longer one for the coil. These are only good if you're using the bigport valley cover though.

[shammy]

what is the valley cover

[dove grey 64]

In between the rocker covers there is a valley. The cover goes there. Leads to suit 4age motors plug into the valley cover to keep debris away from the spark plug holes etc

[rthy]

biport just 1 piece with a rubber seal n shit
http://www.ae86drivingclub.com.au/dcimages/8/9/509111.jpg
the leads sit on top
http://imgc.classistatic.com/cps/blnc/130517/582r1/9906lh2_20.jpeg

smallport sits half way and has some rubber seals
http://www.ae86drivingclub.com.au/dcimages/8/9/509113.jpg
then this cover on top
http://i299.photobucket.com/albums/mm300/dave88b/DSC01821.jpg
looks like this at the end, leads are semi hidden for that newage plastic cover look
http://www.ae86drivingclub.com.au/dcimages/8/9/509115.jpg

[shammy]

haha the cover of course lol thought you ment an actual part of dizzy, can the all the super cheap ones seemed really big , to big to plug in. guess just have to keep looking

[rthy]

there are a few types so best bet is to take a spark plug and dizzy cap then do a test fit.