So anyway i though id share my experience with installling my AE71 pedal box. Ive seen abit of info using templates and stuff and to honest there is really no need.
It was a piece of piss, and took all of about an hour. Keeping in mind i had all my dash out. I probably wouldnt even bother working around everything id just rip it all out.
Ignoring the holes i have already drilled, get the pedal box mounded in and nip up all the bolts making sure the brake booster is in. Get up under the steering wheel with a small screw driver and punch the 2 holes that need to be drilled. Dont hit it too hard just enough to get a mark from the engine bay side. This is where the red arrows are pointing.
Next thing to do is simple..From the engine bay side you should not have 2 small pretrusions from where u just hit.. get a centre punch and hit it the other way. Now u will have both holes centre punched perfectly. Before you drill them scribe a line straight down the centers, than half way between. Done!
Where these 2 lines cross this is the middle of the big hole u have to drill. Save yourself the hassle and just go out and get a hole saw.
Once drilled throw some paint on it and Slap on a Clutch Master!!
.
Reply With Quote