Will give this a try...help wanted for 86!

[AE86 Spoontah]

To begin with i don't really know many of you personally (probably except Dazzla) but i have either met you or bought parts off you. What I'm asking for is a little help to get one mans 86 dream finally finished so he can move onto better things haha.

In all seriousness i'm asking for some help to finish my 86 as i'm near the point of just giving up on it all together. I don't really have much spare time to get things done and i've only just started working on it this week after 1 year of it sitting there.

It's mostly little things that need to be done but i can make a list and see if you guys can maybe help.
SPARKY WORK
- Needs horn and washer bottle wired in
- Fuel pumps wired up properly
- Need yellow plug off igniter (three pin one)

FABRICATORS/GOOD WELDERS (i have a MIG welder)
- Bonnet release brackets need fabbing (alli tig welder needed)
- Exhaust modified to fit
- Airbox/shroud for pod

ENGINE WORK/DRIVELINE
- Needs turbo drain hose changed
- Finish wiring relocation
- Clutch line made
- Tailshaft put back in
- Rear sway bar put in
- Need a W5x speedo input for gearbox

INTERIOR (need to buy some parts)
- Sun visors needed
- Glove box

EXTERIOR
- Roof needs painting
- Bonnet needs painting
- Bonnet pins need fixing
- Front bar needs repainting
- Orange globes for indicators
- Whiteline garnish for drivers side

I will have all the parts needed ready to go but i just don't have motivation to install them.

If one person rocks up for a day i will pay them for their services. If a couple rock up i will put beers and a bbq on. (much like Fast and Furious yo hahaha)

I'm always free on weekends so if you are interested shoot us a PM or message us on 0402 702 102.

I'm located in Ellenbrook as well so it's probably a fair drive for most of you.

Much appreciated Brendon

[sidewayz_simon]

haha wooow... sounds like a mission. you could just part it out.....

[AE86 Spoontah]

I will only part out if everything gets bought at once haha. What do you want lol

[sidewayz_simon]

How much do you want for the lot?

[AE86 Spoontah]

I'll take $8000 for it as is. I'm losing out big time considering i paid $7500 for a rusted rolling shell that wasn't even running. I'll just have to get another key cut coz i lost the only one haha

[sidewayz_simon]

Ouch dude. I paid $8600 for todds coupe. I thought that was pricey. At least it was running, though. Good luck with finishing it off. Not that great with the sprinters, as far as putting them together, But if a need a heavy lifting bitch yell out.

[AE86 Spoontah]

I got ripped off hard coz i was new to 86's at the time. When i got it, it had no rims or tyres, no seat's, no steering wheel, no engine, no brake lines, no gear box crossmember, no fuel setup, shit house wiring, rust everywhere and shitloads more. But for whats in it you couldn't rebuild it for less than about $15g. I don't mean to sound like a tosser or you to think i'm big headed but i think it's one of the most heavily modified 86's in WA for something that isn't a dedicated track car.

[Nikkojoe]

Can help with wiring stuff. Also will have excellent sunvisors available, not cracked/loose (replacing mine with kouki ones).

Carpet, not needed but it looks better if you have some If you need some you can get some online from ebay brand new for decent price.

Can also paint your front bar, just black trim colour? (if not I can still paint it anyway )

EDIT: My post count has hit 1337

[AE86 Spoontah]

Wiring is pretty much spaghetti but if you're confident haha
How much for the visors?
No carpet then suits me
It is painted bumper bar black but it's flaking off.

Anyone else want to join Nikkojoe?

[Beserker99]

Heheh, sounds like instead of a cruise, people should just rock over the Brendon's and help out with his AE86 and have a bbq