Getting off rounded bolts?

[Duurs]

Hey, just been trying to get a bolt out, but the little annoying thing has become rounded and wont move.
the bolt attaches the steering arm to the engine cross member, and i need it off as quick as possible.
anyone got any ideas on getting em off once this happens?
cheers

[Jason]

1. Weld a bolt head onto the fucked one and undo.

2. Hack saw off '2 sides' and undo it with a spanner.

3. Use of of those ez out kits

4. Drill it out and re-tap

5,6,7,8....
These heaps of ways to do this

[24 yr old Two door 86]

get a socket one size smaller and a large hammer......belt socket on to rounded bolt and undo

[Bustin_86]

^^^ Then throw away socket

My fav trick is welding a piece of bar on. That way you loosen it and then just take it out by hand, cheering!

[Duurs]

dont have access to a welder, might have to try the socket thing, but dun realy wana puck up a socket

[Nikkojoe]

<div class='quotetop'>QUOTE (duurs @ Nov 9 2007, 11:45 AM) </div>Buy a supercheap $1 special, best suited for these purposes

[biggo]

angle grinder

[bahnugget]

drill & angle grinder

[86xxx]

Heat it up with a oxy torch, butane torch or something. Then undo it whilst still hot. Oldest trick in the book

[Duurs]

got it angle grinder ftw now to put the new sump on