F-Series Tarago Diff Models and Years?

[lloydious86]

Hey guys i have found a toyota tarago diff (manual) i want to use in my sprinter, its from a 1984 tarago.

Do you have to use a tarago diff from a yr21 or yr22? or is yr20 ok aswell, being from an 1984 tarago i have a feeling it may be a yr20 im not sure would i be able to use this diff and will it be an f-series?

[Dom86]

yr22. 85-89 I'm pretty sure.

This may be of use to you...

[Hen may possibly be a nut]

AFAIK YR20 and 21 ran E series, and it was only the YR22 that came with an F.

Personally I've played with a YR22 which had an F series according to both the build plate and my eye when I pulled the thing out. Never played with a YR20 or YR21.

Hen

[Vance]

this is easier

[Dom86]

That is good
thanks

[Nikkojoe]

ahh good to see norbie's axle page working again

[Jonny Rochester]

Well, if you are taking the diff out of the car, then YOU can look at the ID place and tell us what diff it is. As Hen said, probably E series. I could look it up, but only you can be sure because YOU are the one with the ID plate.

It probably isn't LSD, and isn't a straight bolt in.

[70XIN]

YR21 and YR22's both have F-series diffs

I have pulled one out of both

[sundee]

Im pretty sure F series sat behind the EFI engines.. E series were with carbed engines

[dr1ft-pig]

yr22 had e series in the carby model and the f series came behind the efi model

if its already out of the car rip the centre out and measure crown wheel

f series are 7.5 inch and e series i think are 7.1??