Results 1 to 10 of 11

Thread: Ex drift pig res-er-wreck --tion

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member AIROCOBRA's Avatar
    Join Date
    Apr 2009
    Name
    Bob
    State
    ACT
    Location
    Weston
    Country
    Australia
    Posts
    343

    Default Ex drift pig res-er-wreck --tion

    I have 5 X AE86 , IN VARIOUS CONDITION ----- I know , how lucky I am , how unworthy of me etc etc ----


    1. AE86 4AGE 16V N/A TRACK CAR ( RED )
    2. AE86 4AGE 16v N/A ( STREET CAR FOR SON ) ( RED )
    3. AE86 ROLLING SHELL --- IN CASE I F-CK UP !!!!!! (PRIMER )
    4. AE86 ADM 16v ( STREET CAR) 4AGE 16V , twin 40mm webers (RED ) under construction
    5. AE86 ADM 4AC RUST BUCKET KHANACROSS CAR (MATT BLACK )

    Now the car in this story is AE86 ADM 4AC RUST BUCKET KHANACROSS CAR (MATT BLACK ).
    I purchased it about 12 months ago as a parts car --- new it was a rust bucket , ex drift car from QLD . Did not pay much for it ( BUT STILL TO MUCH ). As all cars bought unseen ( always a mistake ) it had a few suprises , they always do . Bit more rust than I expected , ke70 stuts one side ,ae71 on the other , 4ac engine with compressions from 135 to 155 , clutch slipping etc etc --- I think you get the idea and if not photos may help.

    Well 2 weeks ago I had an idea !!!!???? I said to my son , there is a Khanacross on Dec 3 lets enter.
    Now of the 5 Sprinters , they are as follows ----

    1 is set up for track work , 2. has only been on the road for 2 weeks after a full rebiuld – to nice , 3 is spare rolling shell , 4. under re-construction . So it will have to be number 5 .
    So the following needs to be done in 12 days ---- convert and fit FWD AE82 4AC engine , new seals for gearbox, weld up a S series diff and install , new rear brakes and wheel bearings ( 2nd hand of coarse , but not stuffed ). Fit a matching front suspension , do something with the worst of the rust ( doesn't have to look pretty just put some strenght back into the shell , fit harness belts and mounts. Find a fit some cheap shocks , cut down and fit AE82 std springs . Fit plastic side wndows as not enough metal left to hold the glass wndows in. Find and fit non leaking radiator . Make up and fit front and rear bumper mounts ( std one are missing ) Make a set of rear flares to cover rusted out rear wheel arches. And the list went on & on & on --------------
    So on day 12 , with no testing , we put it on the trailer to go to the event ---- and how did it turn out , well stayed tune to fine out ----- did the drift pig fall apart or did she live to fight another day ?????//

    The day I bought the Drift Pig

    Plus a few pics of the wee problems !!!!!








    Then with 12 days to the event ---- let the fun begin !!!!!!!!!!!



    Finished and ready to go !!!!!!!!!



    Last edited by AIROCOBRA; 4th December 2011 at 06:31 PM.
    ONLY THE GOOD DIE YOUNG ------ I MUST BE VERY VERY VERY BAD

    AE86 4AGE 16V N/A TRACK CAR ( RED )
    AE86 ROLLING SHELL --- IN CASE i F-CK UP !!!!!! (PRIMER )
    AE86 ADM UNDER CONSTRUCTION ( STREET CAR) 4AGE 16V , (RED )
    AE86 Trueno ( RESTORE TO PERIOD GOODNESS ) White
    AE86 4AGZE Wreck ( to be rebuilt into Khannacross fun car )
    KE 15 x 2 -- SPRINTER ( RESTORE TO PERIOD GOODNESS ) RED
    TE72 (T18) X 2 BIT OF PAINT , BIT OF MECHANICAL way we go RED
    Soarer 1995 1JZ Factory 5speed (R154 )

Similar Threads

  1. The drift Pig!
    By Matt in forum AE86 Owners Forums
    Replies: 14
    Last Post: 23rd September 2012, 08:40 PM
  2. Levin drift pig
    By PHAT86 in forum AE86 Owners Forums
    Replies: 55
    Last Post: 22nd March 2011, 08:54 PM
  3. my drift pig
    By Benny in forum AE86 Owners Forums
    Replies: 29
    Last Post: 16th April 2006, 01:08 PM
  4. Our Drift Pig
    By snake666 in forum AE86 Owners Forums
    Replies: 26
    Last Post: 19th December 2005, 06:38 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •