if you already have that out of the car, you should be able to look at all the mounting holes, and then work out how the old one comes off. Very basic.
Hey guys, I have no idea on how to install this:
And can someone also tell me how to remove it as well. Because I'm swapping both around.
Last edited by Houd Chaudhary; 11th June 2015 at 04:52 PM.
if you already have that out of the car, you should be able to look at all the mounting holes, and then work out how the old one comes off. Very basic.
1974 MX22 MARK II CORONA HARDTOP COUPE - Awaiting a full restoration
I still hav the old one in the car, I unbolted all of the bolts I can see, and the end bit is still in do I just pull in out??
Yeah once all the bolts are out it'll drop to the floor
Ae86 Drivingclub - Toyota AE86 Car Club where AE86 | KE70 | Toyota 86 / GT86 | Subaru BRZ | Scion FRS owners
I've got all the bolts off. As u can see so do I just pull it out.
Last edited by Houd Chaudhary; 11th June 2015 at 09:41 PM.
Yep
Ae86 Drivingclub - Toyota AE86 Car Club where AE86 | KE70 | Toyota 86 / GT86 | Subaru BRZ | Scion FRS owners
Aright, I'll giv it a go tomorrow. Thanks man
Undone the steering yoke at the rack?
MOPAR or no car!
haha, i would seriously hope so....
1974 MX22 MARK II CORONA HARDTOP COUPE - Awaiting a full restoration
Yeh thanks guys I got it off, now I've got another problem, I just got an ignition barrel, and it doesn't want to slip in could u guys giv me a how to?